| model |
JY-1002 |
|||
| Type |
Tracked |
|||
| Dimensions mm | Length × width × height |
3327×1450×2400 |
||
| Gauge mm |
1100 |
|||
| Rated traction Kn |
18 |
|||
| Minimum clearance mm |
400 |
|||
| Minimum turning radius m |
0 |
|||
| Structural quality Kg |
1970 |
|||
| Minimum use quality Kg |
2250 |
|||
| PTO maximum output power (Kw) |
65 |
|||
|
Design speed Km/h |
go ahead |
low（km/h） |
high（km/h） |
|
|
First gear |
0.936 |
4.140 |
||
|
Second gear |
1.368 |
6.084 |
||
|
Third gear |
2.196 |
9.900 |
||
|
Fourth gear |
2.880 |
12.960 |
||
|
Design speed Km/h |
Retreat |
low（km/h） |
high（km/h） |
|
|
First gear |
0.720 |
3.726 |
||
|
Second gear |
1.080 |
4.824 |
||
|
Third gear |
1.728 |
7.848 |
||
|
Fourth gear |
2.304 |
10.296 |
||
| Front weight quality Kg |
300 |
|||
| engine model |
YD4EL100C1 |
| form |
Direct injection, vertical, water-cooled, four-stroke |
| Number of cylinders |
4 |
| Bore diameter and stroke mm |
105×118 |
| Displacement L |
4.087 |
| Calibration speed r/min |
2400 |
| Startup mode |
Electric start |
| Lubrication method |
Pressure, splash composite |
| cooling method |
Forced circulation water cooling |
| Calibration power Kw |
73.5 |
| Maximum torque n•m |
≥351 |
| clutch |
Dry veneer |
Dry veneer |
| Gearbox |
Forward 8 files + back 8 files |
Forward 8 files + back 8 files |
| Steering type |
Differential |
Differential |
| Brake type |
Wet multi-chip |
Wet multi-chip |
| Final drive |
Planetary gear |
Planetary gear |
| Walking track model (pitch × number of sections × width) |
90×51×400 |
90×51×400 |
| Lifter type |
Semi-separated |
Semi-separated |
| Oil pump model |
CBN316 (left-handed spline) |
CBN316 (left-handed spline) |
| Distributor type |
External spool valve |
External spool valve |
| Tillage control method |
Force and position control |
Force and position control |
| Cylinder (diameter × stroke) mm |
100×60 |
100×60 |
| Safety valve adjustment pressure Mpa |
16 |
16 |
| Suspension form |
Rear three-point hanging class I |
Rear three-point hanging class I |
| Upper suspension point connecting pin diameter mm |
φ19 |
φ19 |
| Lower suspension point connection aperture mm |
φ22 |
φ22 |
| Power output shaft type |
Detached |
Detached |
| Speed r/min |
720/1000 |
720/1000 |
| Rotation |
Clockwise (toward the shaft end) |
Clockwise (toward the shaft end) |
| Axial extension |
8-38×32×6 |
8-38×32×6 |
| Fuel tank L |
45 |
45 |
| Engine has no bottom shell L |
9 (based on the dipstick scale) |
9 (based on the dipstick scale) |
| air filter L |
1.0 (based on the dipstick scale) |
1.0 (based on the dipstick scale) |
| Gearbox L |
30 (based on the dipstick scale) |
30 (based on the dipstick scale) |
| Hydraulic tank L |
22 |
22 |